100 RO

The IN-WALL loudspeaker, as its name suggests, is an in-wall or in-ceiling loudspeaker. With its small footprint and discreet design, it can replace a more conventional loudspeaker.

The 100 RO is easy to install, simply making a perfectly round hole 143 mm in diameter, but to help you out, a paper model is supplied with all the speakers.

Next, simply remove the protective grille using the hook supplied in each package. Once the grille has been removed and the loudspeaker wired (either by soldering or by terminal block), all you need is a Phillips screwdriver. Then simply turn the 4 or 6 screws (depending on the model), so that small hooks clamp the loudspeakers in place.

INWALL loudspeakers like the 100 RO don’t pretend to replace bookshelf loudspeakers, whose load volume and crossover have been optimized, but special care has been taken to ensure their sound quality: woven Kevlar fiber driver, coaxial textile dome tweeter.

The intrinsic characteristics of the loudspeakers used mean that they can operate either with an almost infinite or a reduced rear load. Depending on the rear volume, the level of low frequencies will change.

Recommended volume: 3 to 8 liters for 100 RO


Puissance max : 60 W
Profondeur d’encastrement : 63 mm
Woofer : 10 cm kevlar
Fréquence de coupure : 80-20 KhZ
Rendement : 84 dB

Impédance : 8 Ohm
Taille du Inwall : 171 mm (D)
Trou d’encastrement : 143 mm (D)
Poids : 0,8 kg (pièce)