130 RE2 PRO

The unique sound of DAVIS ACOUSTICS in this in-wall speaker! The slim-edged cover allows the speaker to be virtually hidden in the ceiling/wall.

2 Kevlar 13 cm woofers + 28 mm soft dome tweeter.

The tweeter is integrated into a swiveling frame (+/- 20°), so you can adjust the direction of high frequencies, and thus perfectly direct the sound wave towards the listening area. 3 different treble levels adjustable on the speaker.

The IN-WALL loudspeaker, as its name suggests, is an in-wall or in-ceiling loudspeaker. With its small footprint and discreet design, it can replace a more conventional loudspeaker.

The 130 RE2 PRO is easy to mount: all you need to do is make a 156 x 365 mm hole, but to help you out, a paper model is supplied with all the speakers.

Next, simply remove the protective magnetic grille. Once the grille has been removed and the loudspeaker wired (either by soldering or by terminal block), all you need is a Phillips screwdriver. Then simply turn the 4, 6 or 8 screws (depending on the model), so that small hooks clamp the loudspeakers in place.

INWALL loudspeakers like the 130 RE2 PRO don’t pretend to replace bookshelf loudspeakers, whose load volume and crossover have been optimized, but special care has been taken to ensure their sound quality: woven Kevlar fiber driver, adjustable textile dome tweeter.

The intrinsic characteristics of the loudspeakers used mean that they can operate with either almost infinite or reduced rear load. Depending on the rear volume, the level of low frequencies will be slightly modified.

Recommended volume: 10 to 15 liters for 130 RE2 PRO

Spécifications

Puissance max : 120 W
Profondeur d’encastrement : 92 mm
Woofer : 21 cm kevlar
Fréquence de coupure : 40-21 KhZ
Rendement : 91 dB

Impédance : 8 Ohms
Taille du Inwall : 262 x 356 mm (D)
Trou d’encastrement : 238 x 330 mm (D)
Poids : 2 kg (pièce)